<p>The company has always adhered to the "quality" for survival, reputation, as the leading business philosophy, has an excellent team of engineers, perfect production equipment and after-sales service.</p>
<p>After-sale service and technical assistance: company provides after sales service and technical assistance as per customers' requirement and needs with response within 24 hours.</p>
<p>Quality assurance,reaasonable prices, service country of origin, experience technical staff, excellent product performance.</p>
<p>There are emergency stocks for regular size perennially.This to save time for you.</p>
Shandong Lisheng Machinery Co., Ltd. is a new generation enterprise dedicated to the hardware industry. It is located in Jining City, Shandong Province, the hometown of Confucius and Mencius. The company is a professional hardware supporting enterprise integrating design, research and development, production and sales. The main products are chains, wire ropes and their accessories: shackles, turn buckles, clips, rings, snap hooks and other forgings and castings, and accept drawings and samples for processing.
First, wrap the wire rope around the thimble or to form the eye, and turn back the correct amount of rope—as specified by the manufacturer.
Apply the first wire rope clip at the end of the dead end, with one base width of space. Use a torque wrench to tighten the nuts on the wire rope clip.
When applying the second clip (if required), place it as close to the eye loop or thimble as possible. Again, be sure to properly tighten the nuts of the clip with a torque wrench.
If more than two clips are required, the clips should be evenly spaced between the two that were placed first.
Clips are usually spaced about six wire rope diameters apart to give adequate holding power. They should be tightened before the rope is placed under tension. After the load is placed on the rope, tighten the clips again to take care of any lessening in rope diameter caused by tension of the load. A wire rope thimble should be used in the eye of the loop to prevent kinking.
Wire rope clamps are commonly used in rigging and lifting operations. They are an essential tool for securing wire ropes and can be used in a variety of applications, including construction, shipping, and transportation.
Wire rope clamps are typically made of metal and consist of a U-shaped bolt, a saddle, and two nuts. They are available in a range of sizes to fit different diameters of wire rope and can be used to create loops or thimbles in the rope.
I am very satisfied for top quality product,quick response and attention provided by this seller and company，Thank you!
Quikly send,very good communication,all is ok,without problem.
Very good quality,fast and safe shipment,Nothing to improve
Great seller!Always online and helpful.Speedy delivery,very good and secure packing.
<p>Cable clamps (popularly known as cable cleats) are an essential component when installing cable and are recommended in almost every electrical installation. According to IEC 61914:2009, Cable Clamps/ Cleats are &ldquo;devices designed to provide securing of cables when installed at intervals along the length of the cables&rdquo;</p>
<p>A rope clamp is a bolted fastener used to bind cord in a particular position. Rope clamps commonly include two halves joined by two or more bolts. The halves are joined and secured in place with the doubled-over rope running in between. One of the most common uses of a rope clamp is to form a loop at the end of a cord.</p>
<p>Three wire rope clamp<br />At least three clips should be used when making any prepared loop or thimble-eye termination for wire rope (especially for overhead lifting). All three clips must be installed with the saddle part on the live end of the rope.</p>